ACCESSORIES
110' Wall Foam
1/8" Thick
Protection Layer
Blue / White foam
Pool Type: Above-Ground
This 110-foot roll of professional-grade wall foam provides a protective cushion between your pool liner and the metal wall. It's an essential upgrade for any above-ground pool owner looking to prevent corrosion and extend the life of their new liner.
FIT CHECK BEFORE YOU BUY
- Confirm pool circumference to ensure 110' provides full coverage.
- Best used during new liner installation or liner replacement.
- Verify wall height to determine if trimming or stacking is required.
Quick Fit Snapshot
- Pool Type: Above-Ground
- Shape: Round / Oval
- Size: Fits up to 33' Round or 18'x33' Oval
- Wall Height: 42" to 54" Coverage
- Roll Length: 110 Feet
- Thickness: 1/8" High-Density Foam
Why You'll Love It
- Extends Liner Life — Acts as a barrier against rust, corrosion, and sharp wall bolts.
- Insulated Barrier — Helps retain water heat by reducing heat loss through the pool walls.
- Soft-Touch Feel — Provides a smooth, premium feel to the pool walls for swimmers.
- Easy Installation — Lightweight and easy to cut with standard household scissors or a utility knife.
What's Included
- One (1) 110' Roll of High-Density Wall Foam
- Continuous roll for seamless application
- Manufacturer warranty applies
Installation Notes
- Clean the pool wall thoroughly and remove any loose rust or debris.
- Apply spray adhesive (sold separately) to the metal wall in sections.
- Press foam firmly against the wall, starting from the top and working down.
- Trim excess foam and tape seams with wall foam tape for a smooth transition.
PRO TIP
Don't forget the Spray Adhesive. You will typically need 2 to 3 cans of adhesive to properly secure a 110' roll of foam to your pool wall before the liner is hung.
Foam color may vary by production run. Ensure you have adequate adhesive and tape on hand before beginning installation.
