ACCESSORIES
65' Wall Foam Roll
Protective Barrier
Thickness: 1/8"
Blue / White
Pool Type: Above-Ground
This 65-foot roll of professional-grade wall foam provides a cushioned layer of protection between your pool liner and the metal wall. It's an essential upgrade for any above-ground pool owner looking to prevent punctures, corrosion, and heat loss while giving the pool walls a soft, premium feel.
FIT CHECK BEFORE YOU BUY
- Confirm pool circumference to ensure 65' provides full coverage.
- Apply only to clean, dry pool walls for proper adhesive bonding.
- Use spray adhesive (sold separately) to secure the foam to the wall.
Quick Fit Snapshot
- Pool Type: Above-Ground
- Shape: Round or Oval
- Size: Fits up to 20' Round / 15'x30' Oval
- Wall Height: 42" / 48" / 52" / 54"
- Roll Length: 65 Feet
- Thickness: 1/8" High-Density Foam
Why You'll Love It
- Extend Liner Life — Acts as a shield against wall corrosion, rust, and rough metal edges.
- Improved Insulation — Helps retain water temperature by reducing heat transfer through the metal walls.
- Luxury Soft Touch — Eliminates the "hard wall" feel, making the pool sides comfortable to lean against.
- Prevents Liner Pinholes — Creates a smooth surface that prevents friction-related wear and tear.
What's Included
- One (1) 65-foot continuous roll of pool wall foam
- High-density closed-cell foam construction
- Manufacturer warranty applies
Installation Notes
- Ensure the pool wall is free of rust, dirt, and sharp burrs before application.
- Apply a thin layer of spray adhesive to the pool wall in manageable sections.
- Unroll the foam and press firmly against the wall, keeping the top edge flush with the top rail.
- Trim any excess foam at the seams with a utility knife for a perfect butt-joint fit.
PRO TIP
For a standard 24' round pool, you will need approximately 76' of foam. This 65' roll is perfect for pools up to 20' round; please calculate your circumference (Diameter x 3.14) to see if you need a second roll or a longer length.
Foam color may vary. Spray adhesive is required for installation and is sold separately. Always verify pool measurements before opening or cutting the foam.
