Replacement Backwash Slide Valve For Power Klean Systems
This heavy-duty slide valve is a direct replacement for Power Klean D.E. and sand filters, designed for effortless one-handed operation. It makes filter cleaning faster and more efficient by allowing you to reverse water flow with a simple pull of the handle.
Why You'll Love It
- Low-Friction Design — Slides smoothly between "Filter" and "Backwash" positions without sticking.
- Maximum Flow Rate — Wide internal ports ensure high-volume water passage for thorough filter cleaning.
- Rugged Durability — Constructed from UV-resistant PVC and reinforced resins to withstand high pressure.
- Zero-Leak Seals — High-quality O-rings prevent bypass leakage, keeping your pool water in the pool.
Best For
- Power Klean Filter Systems
- D.E. (Diatomaceous Earth) Filters
- High-Flow Sand Filters
- Replacing leaky or seized piston valves
Quick Tips
- Always turn off the pool pump before moving the slide valve handle to prevent seal damage.
- Apply a thin layer of silicone-based lubricant to the piston O-rings twice a season.
- Ensure the handle is fully locked in the down (Filter) position during normal operation.
- Check the waste line for trickling water, which indicates it's time to replace the internal gaskets.
Key Features
Fit & Compatibility
Care & Storage
- Rinse with fresh water after backwashing.
- Inspect O-rings for flat spots or cracks.
- Lubricate annualy with silicone pool lube.
- Winterize by draining the valve body in freezing climates.